Revit Revolving Doors (Curtain Walls)

Prix régulier$67.85
/
Taxes incluses. Frais d'expédition calculés lors du passage à la caisse.
License
  • Êtes-vous un étudiant? Sélectionnez l'utilisation éducative.

9 parametric Revit revolving and curved sliding door families for curtain walls, with three door positions, two canopy shapes and full subcategory control.
  • Téléchargement numérique
  • Version Revit : 2020
  • Créé par : Studio R.D.
  • Catégories de packs : Doors
  • Système d'unités : Metric et Imperial
  • Version du produit : V1

Produits gratuits
Notre licence d'utilisation éducative gratuite est spécialement conçue à des fins académiques. Sous cette licence, les produits gratuits de RD Studio peuvent être utilisés dans des contextes éducatifs, notamment des activités en classe, des projets académiques et d'autres initiatives d'apprentissage. Lorsque vous utilisez un produit, vous devez accorder l'intégralité du crédit à RD Studio, avec un lien actif pour les versions en ligne . De plus, si un projet utilisant notre produit est présenté sur les réseaux sociaux, vous devez créditer RD Studio avec une balise active sur notre profil. Veuillez noter que l'utilisation commerciale de ces produits sous cette licence est strictement interdite.

Usage éducatif
Les produits étiquetés « Usage éducatif » sont exclusivement destinés à une utilisation étudiante en milieu universitaire. Ces produits sont destinés à soutenir le développement éducatif et ne doivent pas être utilisés à des fins commerciales.

Un usage commercial
Avec l'achat d'une licence d'utilisation commerciale, vous êtes autorisé à utiliser le produit dans des projets commerciaux sans avoir besoin d'attribuer RD Studio. Cependant, les interdictions standards de reproduction, de distribution et de revente, telles que détaillées dans la section « Strictement interdites », restent applicables.

Licence multi-utilisateurs universitaire
La licence multi-utilisateur universitaire est adaptée aux établissements d'enseignement, permettant à jusqu'à 30 utilisateurs, y compris des étudiants et des enseignants, d'utiliser nos produits à des fins académiques. Cette licence facilite l'utilisation de nos produits dans des environnements éducatifs, tels que l'apprentissage en classe, la recherche universitaire et les projets étudiants. La redistribution ou l'utilisation commerciale de ces produits sous cette licence n'est pas autorisée.

Strictement interdit
Vous n’êtes en aucun cas autorisé à reproduire, distribuer, copier ou vendre le contenu de RD Studio. Les produits ne peuvent pas être vendus sans faire partie d'un projet ou d'un travail plus vaste combinant les produits numériques RD Studio avec d'autres éléments graphiques, de modélisation ou numériques. De plus, vous n'êtes pas autorisé à utiliser les produits de RD Studio dans des services similaires ou concurrents.

Dossiers zippés
Pour décompresser un dossier ZIP, cliquez avec le bouton droit pour sélectionner Extraire ici.

Comment charger des familles Revit
1. Ouvrez Revit, allez dans l'onglet Insérer et appuyez sur Charger la famille
2. Choisissez la famille téléchargée depuis votre ordinateur

Pour plus d'informations, veuillez visiter notre page d'instructions de téléchargement et d'installation .

🔄 Three Door Positions

Move the door along the curtain wall with one Offset From Wall parameter. Switch between End Post, Throat Opening and Keyhole connections to match any entrance layout.

⭕ Choose Your Canopy Shape

Pick a Circular or Trimmed canopy for each door, with its own canopy material, so the top of the drum fits the look of your entrance.

🎨 Create Any Door Style

Set the frame, panel, glazing and canopy materials to build any look, from Classic Brass and Modern Black to All Glass and Warm Timber.

Revit Revolving Doors Families for Curtain Walls

A collection of 9 parametric Revit revolving and curved sliding door families for curtain walls: 2, 3 and 4 wing revolving doors, high-capacity and showcase versions, a revolving double and a curved sliding door. Each door sits in a curtain wall panel, so you can swap any glazed panel for a revolving door. Every family has adjustable dimensions, three door position options, a choice of canopy shape, its own subcategory for every part and clean floor plan graphics. They’re built for hotels, offices, airports and other busy entrances.

Key Features

  • ✅ Placed directly in curtain wall panels
  • ✅ Three door positions: End Post, Throat Opening and Keyhole
  • ✅ Circular or Trimmed canopy, with a separate canopy material
  • ✅ Adjustable door rotation angle
  • ✅ Parametric enclosure, wing, canopy and push bar dimensions
  • ✅ Push bar visibility toggle
  • ✅ Opening lines in plan, elevation and 3D
  • ✅ Overhead canopy lines in plan
  • ✅ An RD subcategory for every part

We Created Hard-to-Get Doors

Some door types are rarely found as Revit families. This collection includes them: the Revolving 3 Wing Sliding, the Revolving Double, and the Sliding Curved door. Each one is fully modelled and ready to place in your curtain walls.

Door Position

Slide the door along the curtain wall with a single Offset From Wall parameter. It moves smoothly from an End Post connection, through a Throat Opening, to a Keyhole connection, so you can match the exact layout of any entrance.

Opening Lines in Elevation, Floor Plan and 3D

Every door shows its opening lines in plan, elevation and 3D views, for both revolving wings and sliding panels. Your drawings show how each door operates without any extra drafting.

Subcategories

Each door is split into five subcategories: Canopy, Frame, Glazing, Hardware and Panel. You can control the line weight and colour of each one in Visibility/Graphics, which makes it easy to adjust how the doors look in different views.

Flexible Sizes and Movement

Change the door’s size to fit any curtain wall opening. You can also rotate the wings and open the sliding panels to show the door in any position, which makes your plans and renders more realistic.

How to add a Revolving Door to a Curtain Wall

Select a glazed panel in your curtain wall and change its type to any revolving door. Match the grid spacing to the door’s Width and Height, and the door fits neatly between the mullions.

How to move a Revolving Door Between Positions

Change the Offset From Wall parameter to move the door between End Post, Throat Opening and Keyhole connections. Then match the curtain panel to the Door Width or Door Opening Width, and the wall adjusts around the door.

Ideal Use Cases

  • 🏨 Hotel and resort entrances
  • 🏢 Office buildings and lobbies
  • ✈️ Airports and transport hubs
  • 🛍️ Shopping malls and retail
  • 🏥 Hospitals, banks and public buildings

Technical Specifications

  • 🗂️ Category: Doors (curtain wall panel)
  • 📐 Instance parameters: Sill Height, Offset From Wall, Door Rotation Angle, Push Bar, Circular / Trimmed canopy, Plan Overhead Lines
  • 📏 Type parameters: Width, Height, Door Opening Width; Enclosure Frame and Mullion Width; Frame and Panel Thickness; Canopy Height; Base Trim Height; Door Wing Frame and Mullion Width; Push Bar Depth and Profile Diameter; Showcase Width; Shelf Thickness; Shelves Number
  • 🖥️ Compatibility: Revit 2020 and newer
  • 📏 Units: metric and imperial

Note: This collection is for curtain walls. For standard Revit walls (Basic Walls), use our Revit Revolving Doors for solid walls.


Veuillez vous assurer que votre version de Revit est compatible avec la version du produit

  • Version Revit : 2020
  • Le dossier de téléchargement contient 9 familles Revit

Catégories de packs :

  • Doors

Système d'unités :

  • Metric
  • Imperial

RD Studio est une usine BIM créative qui crée des familles de haute qualité pour les scripts Revit et Dynamo en mettant l'accent sur l'innovation et la fonctionnalité.

Consultez notrePage À propos ici